Some of the most useful application, especially for a Cisco Lab, are TFTP, FTP and Syslog Server. 3CDaemon tool can be all those servers using a simple interface. Using the Application our machine can also act as a FTP Client.
You can download 3CDaemon through by following this link. We can unzip the compressed file and install the application.
Even this is a Server Application, we will use our Admin Windows 7 Machine (WIN7-ADMIN) with IP Address 10.10.10.51. The installation is very simple.
After that the Application will be installed on our device.We can go to Start > All Programs > 3CDaemon > 3CDaemon and run the tool.
We will get a Windows Firewall pop-up warning, we will select the application on the domain and private networks and press Allow access.
We can see that our VM is listening on Syslog messages on its main IP Address.
We can press the STOP symbol to start the Service, and on the same place we can start it.
We can go to configure and set the different settings, by simply jumping to the other TABs.
For TFTP the settings are simple. When someone wants to upload a file using TFTP, we can specify, if the file already exists, then to be overwritten
On FTP settings, we can specify users that have different permissions. By default only the anonymous user exists and has only login and download access. To add a new user, simply type a new name unde the Profile Name, tick the permission options and then press Save Profile. Press Set/Change User's Password, to set a password.
Finally we need to add Firewall rules in order incoming TFTP, FTP and Syslog Traffic to be allowed, as we did on a previous post. Syslog uses TCP and UDP port 514, FTP TCP Port 20,21 and TFTP UDP Port 69.
Below we can see all the Firewall rules. The last two were created when we initialized the Application.
We can also go a step further and create DNS A records for those services, so we don't have to remember the IP Address of our host - check DNS section of previous post
You can download 3CDaemon through by following this link. We can unzip the compressed file and install the application.
Even this is a Server Application, we will use our Admin Windows 7 Machine (WIN7-ADMIN) with IP Address 10.10.10.51. The installation is very simple.
After that the Application will be installed on our device.We can go to Start > All Programs > 3CDaemon > 3CDaemon and run the tool.
We will get a Windows Firewall pop-up warning, we will select the application on the domain and private networks and press Allow access.
We can see that our VM is listening on Syslog messages on its main IP Address.
We can press the STOP symbol to start the Service, and on the same place we can start it.
We can go to configure and set the different settings, by simply jumping to the other TABs.
For TFTP the settings are simple. When someone wants to upload a file using TFTP, we can specify, if the file already exists, then to be overwritten
On FTP settings, we can specify users that have different permissions. By default only the anonymous user exists and has only login and download access. To add a new user, simply type a new name unde the Profile Name, tick the permission options and then press Save Profile. Press Set/Change User's Password, to set a password.
Finally we need to add Firewall rules in order incoming TFTP, FTP and Syslog Traffic to be allowed, as we did on a previous post. Syslog uses TCP and UDP port 514, FTP TCP Port 20,21 and TFTP UDP Port 69.
Below we can see all the Firewall rules. The last two were created when we initialized the Application.
No comments:
Post a Comment