Sunday, November 22, 2026

Debian 13 on an Intel NUC: a step-by-step installer guide

This walkthrough follows the installation for a dedicated, headless n8n server on an Intel NUC. The images are clean recreations of photographed installer screens, so check the live installer before making a final choice. Screen 21 reflects the final software selections reported after its source photo was taken.

Drive warning: The whole-disk steps erase the selected drive. In this example the 120 GB internal Kingston is /dev/sda and the 30.8 GB SanDisk installer USB is /dev/sdb. Verify model and capacity on your own screen because device names can change.

Boot and basic settings

1. Open the boot menu

At the Intel NUC splash, press F10.

Debian installer screen 01: Open the boot menu
Screen 01: Open the boot menu

2. Boot the installer USB

Select the USB: SanDisk entry, not the internal Kingston.

Debian installer screen 02: Boot the installer USB
Screen 02: Boot the installer USB

3. Start Debian

Select Graphical install. The photo shows Debian 13 in BIOS mode.

Debian installer screen 03: Start Debian
Screen 03: Start Debian

4. Choose a language

English is selected in the photo. Choose the language you want for the installed system.

Debian installer screen 04: Choose a language
Screen 04: Choose a language

5. Choose your location

Select the country where the NUC will be used. This affects time zone and the initial mirror list; the photo highlights United States, but United Kingdom is also visible.

Debian installer screen 05: Choose your location
Screen 05: Choose your location

6. Choose your keyboard

Match the physical keyboard. The photo highlights American English; choose British English for a UK keyboard.

Debian installer screen 06: Choose your keyboard
Screen 06: Choose your keyboard

Network and account

7. Pick the network adapter

Use enp0s25 for a connected Ethernet cable, or wlp2s0 for Wi-Fi. A wired connection is usually simpler for a server.

Debian installer screen 07: Pick the network adapter
Screen 07: Pick the network adapter

8. Wait for DHCP

The installer requests an address automatically.

Debian installer screen 08: Wait for DHCP
Screen 08: Wait for DHCP

9. If DHCP fails

Check the cable/router or Wi-Fi connection, then retry. If you must continue offline, the installer may have to skip the network mirror; connect the machine and update packages after installation.

Debian installer screen 09: If DHCP fails
Screen 09: If DHCP fails

10. Set a hostname

debian works; a useful name such as n8n-nuc makes the machine easier to identify.

Debian installer screen 10: Set a hostname
Screen 10: Set a hostname

11. Set the domain name

Leave this blank if you do not run a local domain. The photo shows mynet, which you need only if it is actually your network's domain.

Debian installer screen 11: Set the domain name
Screen 11: Set the domain name

12. Set administrator access

Leaving the root password blank locks direct root password access and gives the first user sudo access. This is a good choice for a personal server.

Debian installer screen 12: Set administrator access
Screen 12: Set administrator access

13. Create your user

Enter your name, then follow the next prompts to set a login name and a strong password.

Debian installer screen 13: Create your user
Screen 13: Create your user

Partition the internal drive

14. Choose a partitioning method

For a dedicated NUC that may reboot unattended, choose Guided - use entire disk and set up LVM. Choose encrypted LVM if you want a passphrase at startup. The later photos show that the path captured here uses plain, unencrypted LVM. The highlighted “largest continuous free space” option in this photo is a different path.

Debian installer screen 14: Choose a partitioning method
Screen 14: Choose a partitioning method

15. Choose the disk carefully

Select the 120.0 GB ATA KINGSTON internal drive. The 30.8 GB SanDisk Cruzer Blade is the installer USB. Do not confirm until the model and capacity match the drive you intend to erase.

Debian installer screen 15: Choose the disk carefully
Screen 15: Choose the disk carefully

16. Choose the layout

All files in one partition is a practical simple layout for this 120 GB n8n machine.

Debian installer screen 16: Choose the layout
Screen 16: Choose the layout

17. First write warning

Confirm only if the listed disk is the internal Kingston and you have a backup. This writes partition changes so LVM can be configured.

Debian installer screen 17: First write warning
Screen 17: First write warning

18. Choose LVM space

The installer offers 119.0 GB. Keeping the default uses almost all available space for the guided layout.

Debian installer screen 18: Choose LVM space
Screen 18: Choose LVM space

19. Final format warning

Review the listed sda partitions, root filesystem, and swap. Yes formats them and erases existing data on that disk. If anything is wrong, choose No and go back.

Debian installer screen 19: Final format warning
Screen 19: Final format warning

20. Select the Debian mirror

Choose deb.debian.org if the machine has working internet. If the earlier DHCP failure remains unresolved, fix networking first or use the installer's offline path if offered.

Debian installer screen 20: Select the Debian mirror
Screen 20: Select the Debian mirror

Finish Debian

21. Choose software

For this headless n8n server, you reported leaving SSH server and standard system utilities selected, while clearing web server and all desktop environment options. The original photo was taken before these final changes; the recreated screen shows the final selection you described.

Debian installer screen 21: Choose software
Screen 21: Choose software

22. Install GRUB

Choose Yes to install the boot loader to the primary drive, provided this is the intended single-OS setup.

Debian installer screen 22: Install GRUB
Screen 22: Install GRUB

23. Choose the GRUB device carefully

Select the internal Kingston drive shown here as /dev/sda, not the SanDisk Cruzer Blade installer USB shown as /dev/sdb. Verify the drive names on your own screen.

Debian installer screen 23: Choose the GRUB device carefully
Screen 23: Choose the GRUB device carefully

24. Complete and reboot

Remove the installation USB and choose Continue. The NUC should boot from the internal drive into Debian.

Debian installer screen 24: Complete and reboot
Screen 24: Complete and reboot

After the first boot

Sign in, confirm that the network works, then update Debian with sudo apt update && sudo apt upgrade. Next, follow the current Docker Engine instructions for Debian and n8n's Docker Compose instructions. Keep n8n data in a persistent volume and back it up. If you need access from the internet, put it behind HTTPS and a reverse proxy.

References: Debian installation guide · Docker Engine on Debian · n8n with Docker Compose

No comments:

Post a Comment